A garage door can become malfunction for quite a few reasons, but one sign of them that I observed most often is the broken garage door springs. These springs are used to support the more than 400 pounds weight of the garage door.
They help the garage door to move easily by counterbalancing its overall weight but unfortunately, the weight of the garage door takes a toll on the torsion springs over time and causes them to damage. It is important that you get your springs replaced as soon as they get damaged because they will cause a severe headache that you do not want to handle. To read more about garage door springs, and how to make your equipment safe, visit the site for service and to get learn more tips and techniques.
The life cycle of garage door springs:
The springs which are used on the garage door are normally rated in “cycles” which indicates how many times these springs will be ideal to use before they break. According to experts, the high-quality garage door springs are rated for 30,000 plus operating cycles before they need to be replaced. Assuming that you have a well-maintained and efficient garage door that is opened and closed about 6 times a day, it is expected to get 7 years of working life before the springs break.
Types of garage door springs:
There are two common types of springs that are installed on overhead garage doors. One is extension spring and other is torsion springs. An overhead garage door that uses a torsion spring normally has one large spring mounted on the top of the garage door with a metal spindle running through it. The torsion spring clamps down on the spindle or uncoils when the garage door goes up and down. They work to generate and release pressure to help the garage door to move freely. They also help to balance the weight of the garage door during the opening and closing process. The garage door uses extension springs normally has one spring mounted on either side of the garage door that stretches out and bounces back when the garage door runs.
Garage door spring repair process:
You may be thinking how do I know if my garage door springs are malfunction or broken and what do I do to fix them? Some potential telltales of garage doors include the garage door opener demands more power to lift the garage door. You may hear a loud sound while the garage door was working previously and the garage door is hanging at an angle.
If you are facing trouble with a broken torsion spring, I strongly recommend that you contact an experienced, trained, and qualified garage door expert for assistance. Don’t forget that torsion springs are under a high amount of pressure that needs to be released properly to avoid turning the spring into a dangerous object if it beaks suddenly. Furthermore, the garage door needs to be aligned properly to avoid additional damages on springs, garage door tracks, and garage door opener.